Products Salt electrolysis water treatment


Chlorine regulator for monitoring an electrolyser

Salt electrolysis water treatment


This compact, panel-mounted, easy-to-install system offers an ideal solution for the regulation and dosing of steriliser in indoor or indoor swimming pools equipped with a salt electrolyser.

The PILOT'RX integrates a bypass-mounted probe holder on an analysis chamber and a digital Redox-meter.

The management electronics are protected inside an ABS IP65 enclosure, thus guaranteeing perfect safety. The display is a backlit liquid crystal display. This device is particularly suitable for indoor or indoor tanks equipped with a salt electrolysis system for which it is particularly difficult to find the right programme to permanently benefit from an ideal sterilisation rate.

The PILOT'RX is available in two versions:

  • PILOT'RX CS with dry contact control;
  • PILOT'RX 230 with control via 230-volt power supply.

PILOT'RX is sold and shipped with a kit consisting of:

  • Electronic panel;
  • Analysis chamber with probe holder;
  • Redox probe with 5-metre cable;
  • 2 metre cable for electrolyser control or 230V socket;
  • 9 metres of suction/discharge hose;
  • 650mV Redox 'buffer' solutions;
  • Wall mounting kit and spare fuse kit;
  • Instruction manual.

Please note that all material is covered by a 2-year warranty, excluding probes, only with installation and initial start-up carried out by an authorised professional.

Show more Hide
Request information

Technical characteristics

Panel height 320mm
Panel width 415mm
Panel depth 150mm
Display Liquid crystal backlit
Power supply voltage 230V
Power supply frequency 50Hz
Circuit protection Timed fuses
Connections 10 Ohm for Redox probes
Minimum operating temperature 0°C
Maximum operating temperature 50°C
Electrolyser control Cable connection 2m dry contact
Minimum measuring range 0mV
Maximum measuring range 1000mV
Accuracy ± 1mV
Weight 2800g
Frame IP 65